Punch In Ball Bearing Lift-Master Hinges - 50x50 Aluminium Hub [PAIR]
- Ball Bearing Hinge to fit inside 50x50 SHS tube
- Can be knocked in and welded (hub must be same material as the SHS)
- For up to wall thickness 2.0mm (hub can be grinded down to fit thicker wall thicknesses)
- Sold as a pair (Top & Bottom. Bottom one capped)
- With zinc plated steel angle brackets
- Loading capacity 300kg
- Also known as "Knock In" Hinges.
- Recommended to be oiled every 3 months.
Offset from the edge of the bracket to centre of the hub is 49mm.
Specifications for Punch In Ball Bearing Lift-Master Hinges - 50x50 Aluminium Hub [PAIR]
Material | Aluminium |
- Ball Bearing Hinge to fit inside 50x50 SHS tube
- Can be knocked in and welded (hub must be same material as the SHS)
- For up to wall thickness 2.0mm (hub can be grinded down to fit thicker wall thicknesses)
- Sold as a pair (Top & Bottom. Bottom one capped)
- With zinc plated steel angle brackets
- Loading capacity 300kg
- Also known as "Knock In" Hinges.
- Recommended to be oiled every 3 months.
Offset from the edge of the bracket to centre of the hub is 49mm.
Once the user has seen at least one product this snippet will be visible.